Construction adhesives
Chemical additives in concrete
Concrete sealing material
Concrete lubricants
P.V.C Waterstop
Plastic Spacers

Zorlu was established in 2011 to produce concrete additives, polymer tapes and plastic spacers in the construction industry. Concrete admixtures, polymer tapes, plastic spacers are a collection of efficient products in the concrete industry that are part of the definition of concrete today and are of special importance in construction projects. Relying on the latest technical knowledge in the world and advanced laboratory and production facilities, Zorlu Company offers a suitable option to the employer by having experienced staff for each construction project. Existence of coordination and continuous communication between the 3 departments of the employer, laboratory and production efficiency makes this complex possible to achieve better and economical quality in the shortest time ​​​​​​​

Emulsion insulation

Concrete superplasticizer


A protective coating is a bitumen-based emulsion component that is applied to prevent the penetration of chemical salts and destructive ions in the soil on concrete sections before burial. After drying, this material has high elasticity and significant adhesion to the applied surfaces.

Pc100n superplasticizer is a polycarboxylate based liquid additive which is a very strong and significant increase in concrete performance and a strong reduction of concrete mixing water. The purpose of using this product in the manufacture of special concretes, including self-compacting and self-leveling, taking into account the criteria and conditions set out in the Iranian concrete regulations, is to make concrete with high slump and quality and compressive strength higher than the standard.

Read more
Read more

Tile Adhesive

Read more

New products have been produced and marketed for all stages of ceramic tile installation, which provide special benefits and features. One of the most important steps in tiling is installing the tile on the substrate. In traditional methods, traditional mortars (a combination of stone powder and cement) were usually used for tiling. But today, the use of traditional mortars to install tiles is obsolete and special adhesives are used to install ceramic tiles on floors and walls. One of the most common adhesives used for tiling is paste tile adhesive.

Read more
What is a spacer?
Spacer plays an important role in creating a suitable rebar cover. They are used in various cases, including the coverage of rebars in structures such as slabs and walls. Other uses of concrete spacers are in buildings and projects such as dams and tunnels. Concrete spacer is very effective as a result of the work, so that if used, both the quality of the structure and the speed of execution and execution of the construction project will be high; Sometimes the presence of a concrete spacer helps to maintain the distance between two rebars; On the other hand, spacers are used to create the distance between the concrete formwork and the concrete. In general, they are produced in different models, each of which is used in special cases. The reason for using this part is to create a distance between the rebar and the concrete, and on the other hand, parts such as Used stone or wood.
What are the benefits of using a spacer?
Over time, the rebars will corrode due to contact with chemicals and environmental conditions such as moisture, air, substances such as sulfates, etc. This phenomenon will have a very destructive and harmful effect on the instrument, but if you use a cover spacer It is created on the rebar which will protect it against the weather conditions. In making reinforced concrete, in order to increase the work efficiency significantly, this piece is usually used. These pieces are very useful tools that, if used, prevent the movement of the rebar network in the reinforced concrete


Read more
Waterstop is an element used in concrete structures that is installed to prevent the penetration of liquids (especially water) in its joints . In the production of waterstops, different and wide materials are used, each of which has its own characteristics. According to the needs of each structure, the desired water stop material is selected. Waterstops work in such a way that they prolong the flow and movement of water or other liquids so that water cannot penetrate. All water stops usually have a tread that causes adhesion and increases the length of the water path. Waterstop sealing tapes should have a high flexibility to be deformed with the dimensions and volume of concrete structures and with the complexity of the type of sections and execution conditions and in proportion to the dimensions and sizes of the structure in terms of thickness, width, type of ridges and changes. Holes and ... to be designed. One of the most important quality features of Waterstop is its percentage of elongation, tensile strength and stiffness, which must comply with standard requirements. Also, the durability of Waterstop in various conditions, including alkaline environments, is important and should be considered. This waterstop form in the alkaline environment of concrete quickly loses its quality and changes state and leads to leakage and other quality problems such as cracking and corrosion of the support of the structure, etc.
joints in which two different concretes are placed next to each other have the greatest weakness against the infiltration of water and other liquids. To prevent this from happening, waterstop should be used on all concrete joints. Water stop is an important and effective element in waterproofing the whole structure and keeping it against water. Among engineers and structural designers, when it comes to waterstops, the first thing that comes to mind is a waterstop made of plastic or rubber. Polyvinyl chloride, or PVC, has been the most widely used waterstop since about the mid-1950s. In addition to high strength and flexibility, it is easier to work with this type of material in installation and welding. Apart from being water resistant, it is also resistant to groundwater soluble chemicals. In addition to PVC, various metal, plastic, asphalt and hydrophilic materials are used to make the best waterstops. Each of which has its own unique characteristics.
Water stop does only one thing in concrete, and that is to prevent water from penetrating the concrete joints. In other words, water stops cannot prevent water vapor and moisture from entering the concrete through cracks. Unless a waterstop is installed separately for concrete cracks.