A: As an insulation: It is used as a TOPCOAT for final cover and insulation of various surfaces such as pools, cement facades, concrete reservoirs, roofs, health services, terrace, parking with thicknesses of 300 micron up to 5mm.
B: As a resin: It could be applied without any need to be combined with cement grout and for resin any facades in which the color and appearance should not change with any rates of water (according to the type of work) with bot h brush and pistol. Needless to state that applying of this product is impossible on those impermeable surfaces like polished & pre-resin stones, tiles & ceramic, woods and all surfaces which have been pre-covered with paints or oil-based additives (like thinner, tar, waterproofs and other oil extracts). Therefore, all these layers should be removed prior to application.
Preparing the location: Make sure that the final surface is firm and has not settled and there are no surface or deep cracks in the substructure. You may repair the tracks by the use of Zorlu Co. along with water stopping process in prior. Clean the surface from any pollution (fat, dusts, oil products like mold oil & oil paints, old cover and …) and purify the concrete surface by water spraying before cleaning.
*General performance: Executive methods are different according to the performance location. 1- Harmonized by 1 to 1 composition with water, 2- Harmonized by 1 to 1 composition with water + 1 unit cement + 2 units silica and/or stone powder, 3-harmonized with 1 to 1 composition
*Utilization time: 72 hours after application
