رزین سنگ نما

Stone Facade resin 

Today it is very popular to increase visual beauty of inside / outside the building. Among the materials that would be used for this purpose are antique or artificial stones produced and presented to the market in different colors and designs. Antique stone resin is used for increasing the brightness and glossy condition of antique stones inside / outside the building. That may not only increase the glossy condition but also has other special benefits. Antique stone polishing resin is a transparent liquid based on acrylic copolymers which has been modified / reinforced with the help of nanotechnology with suitable coatings for exterior of buildings and the coating of artificial stones inside them. Antique stone polishing resin can be applied on all cement, concrete and brick surfaces, as well as artificial and natural stones. In addition to creating glossy and radiance of the surface, it may cause the surface to be waterproof. Surfaces covered by antique stone polisher find very good resistance to UV rays and atmospheric factors, and will also increase the lifespan of the applied surfaces. One of the special advantages of surfaces covered with antique stone polishing resin is prevention of dusts created by antique stones inside the building and makes them washable as well.

Packing: 1 liter & 4 liter​​​​​​​

Mode: Liquid (Colorless)​​​​​​​

Soluble in oil modes

Chloride ion: --

Properties:​​​​​​​

Resistance against water permeability
No more color change and/or yellowish of surfaces
Increasing the transparency & visual beauty of surfaces
Prevention from emission of dusts from superficial & natural stones
No surface opacity through the time
Washable & cleaning by water and wet cloth
Resistance against UV
Increasing the life span of surfaces
Impermeability of executed surfaces
Impermeable to executed surfaces
High durability

Consumption method:​​​​​​​

Antique stone glossy resin is a single-part and ready-to-use product which is applicable on surfaces by a brush, roll and/or low pressure spray. Be careful to use enough amount of glossy material on vertical surfaces in order not to slur downward. It is proposed to apply this product in two layers in order to make a complete cover one considered surface. Be careful that this product is ready-to-use and no more adding of solvents or specific ingredients is necessary.

Consumption rate​​​​​​​

The consumption rate of this product is different depending upon the type of surface and porosity as well. But it is used generally for one liter of product for covering 4-5 square meter of surface on any surfaces with average porosity.