خرید و قیمت Superplasticizer Concrete Admixture N510

Superplasticizer Concrete Admixture N510

خانه » محصولات » Superplasticizer Concrete Admixture N510

Concrete plasticizers

Superplasticizer Concrete Admixture N510

گالن 20 - 220 - 1000 لیتری

The N510 superplasticizer, like the NR30 superplasticizer, is among the best additives for improving concrete properties. This product is polycarboxylate‑based and is primarily used in producing dense concrete. Therefore, it can reduce the water‑to‑cement ratio while achieving higher early‑age strengths.

Sharing:

Superplasticizer Concrete Admixture N510

Mechanism of Action

The mechanism of this superplasticizer works as follows: when polycarboxylate ether is added to the concrete mix or cement mortar, the polycarboxylate ether molecules align in layers around the cement particles and fully coat them. This process separates cement particles from each other in the concrete or mortar mix.

The side chains of the polycarboxylate ether repel particles, while the hydrophobic force in its main chain causes large molecules to be attracted by the cement particles.

This process structures the water molecules away from the cement particles, making the concrete or mortar flowable. Over time, the charges created in the concrete mix are influenced by reverse induction, and the increase in slump, concrete workability, and cement hydration begins.

To assess product quality, the first step is to check its color. If it is dark brown, it means that materials other than polycarboxylate ether have been used in its composition, and the product will no longer have the properties of a true polycarboxylate superplasticizer.

Concentration is also a quality indicator—if the product has a viscosity similar to oil, is completely uniform, and free of any settled particles, it is high‑quality.

Consumption of N510 Superplasticizer

The standard consumption rate of N510 is 0.4% to 1.3% of the cement weight in the mix. This should be determined through accurate site trials, considering materials used and climatic conditions.

Excessive usage is not allowed—overdosing may delay concrete setting, especially with sulfate‑resistant cement. It is advised to consult experienced experts from ZORLU Chemical for adjustments.

Properties & Effects

This ZORLU Chemical N510 superplasticizer provides:

Prevention of bleeding and segregation of aggregates
Usability in thin or heavily reinforced formwork
Reduction of water content
Increased slump and workability
Higher compressive strength
Lower cement content required
Improved concrete pumpability
Better cohesion in the mix
Concrete compaction without vibration

Applications

Due to its high water‑reduction capacity and maintained slump, it is suitable for:

All kinds of pours: piles, floor slabs, foundations, walls, columns, roofs, prestressed concrete
Manufacturing precast concrete elements
Enhancing performance of cement mortars such as grout for nailing and strand grouting
Structures requiring low permeability and waterproof concrete
Use with pozzolans and blended cements

Safety Instructions

Use PPE (goggles, gloves, mask) to avoid direct contact or inhalation
Avoid eye contact; rinse immediately with plenty of water if it occurs
In case of skin reaction, consult a doctor
Keep away from children and pets

Storage Guidelines

Shelf life: 1 year in original packaging
Avoid frost, heat, and prolonged sunlight
Store in cool, moderate environments, ideally +10°C to +30°C

Packaging

20‑liter jerrycan
220‑liter drum
1000‑liter IBC tank

Standards

ASTM C494
ASTM C1017/C1071M
ISIRI 2930

Physical and Chemical Properties of N510 Superplasticizer

The N510 superplasticizer has the following characteristics:

Physical State: Liquid
Flammability: Non‑flammable
Color: Honey
Specific Gravity: 1.03 g/mL
Solubility: Soluble in water
Chloride Ion Content: In accordance with standard INSO‑12930

Method of Use for N510 Superplasticizer

The amount of superplasticizer should be calculated based on the cement content of the concrete and diluted with twice its volume of the mixing water. This additive should be gradually added to the concrete during mixing.

It can also be added to ready‑mixed concrete, followed by complete mixing before pouring. It is recommended to mix for at least one minute per cubic meter of concrete. Additionally, the product may be introduced into the batching plant or truck mixer during concrete production.

Note: The N510 normal superplasticizer should never be poured directly onto dry cement, in order to preserve the additive’s optimal performance and effectiveness.